5 Things to Look for in Industrial Valves
If you are on the market on the lookout for industrial valves, then we have just the article for you. When you are looking for industrial valves, you have to look at several different factors and determine the quality and functionality of the products. As long as you find a reliable supplier, you should be able to easily communicate your needs.
Make sure you include every detail you want to be taken care of. Here are some things you must look for while buying industrial valves:
1. Know the Purpose
The purpose of the valve involves a lot of different features that are directly related to your use of it. If you know the particular use of every wall on your left, you will be able to make a better contract without including unnecessary purchases. You can also consult the supplier and ask for recommendations regarding the applications you have in mind. Ideally, the purpose of the valve will be related to the following aspects:
- The temperature and pressure of the fluids
- The amount of time it will be in continuous use
- The nature of the media flowing through it
- The maintenance requirements
- The level of control and response time
2. Consider the pressure of the fluids
Depending on the type of purpose you have in mind, you should only choose an industrial valve that will be the most suitable for it. High pressure and low-pressure demands vary based on the applications for which the equipment is being used. When it comes to low pressure, you can get valves that are lighter and comparatively thin-walled.
With high-pressure applications, you will require thick-walled products that are durable and allow a higher rate of control over the flow of the fluid. You cannot buy on impulse because each valve has its own specific applications. So make sure you are choosing accordingly.
3. Consider the temperature of the fluids
You might think that all industrial valves are well equipped to handle extreme temperature ranges, but that is not the case. When it comes to industrial manufacturing, valves are made for different applications and need to be selected accordingly.
Another thing to keep in mind is that extreme temperatures not only include high temperatures but also freezing environments. Just because you read the specifications of a valve saying it can withstand extreme temperatures does not mean that it will fall under your required criteria. The temperature considerations make you look at two main points. The first is the material of construction which will determine whether or not the melting point of a metal is more than the temperature it would be in.
The second is whether or not the valve will be able to give you the entire control over the flow of the fluids. Asking for a prototype is a good approach in these kinds of situations before making a bulk order.
Consider the type of fluids
We are saying fluids are not liquids because they comprise both gasses and liquids. The type of fluids needs to be looked at because it can be detrimental to the equipment if not considered beforehand. Different metals react with different media and cause corrosion or other chemical reactions.
This will lead to serious issues in the manufacturing process. It can also lead you to spend extra on constant repair and maintenance, so it’s better to see the compatibility of the media and the metal.
Consider your factory environment
Different industries have different environments depending on the pneumatic valve manufacturer. Once you have started on the manufacturing process, the life of your machinery and related equipment will depend on the care you take of it as well as on the environmental conditions it is exposed to. There are two ways in which the environment in industrial setup differs.
The equipment and machinery could either be located outside in the open or it can be in a closed environment. If your machinery is located in the open, air and moisture are factors you should be concerned about. In a closed and dust-free environment, your equipment will be in better condition; however, then the life of the valves will depend on the media and on your maintenance practices.
The Takeaway
The hope that you now feel confident the next time you talk to an industrial valves supplier. There are many other factors to look at, but the ones mentioned in this article are a good way to begin. Many subjective requirements will also factor in, so make sure you make a list and check everything off to find the right industrial valves. If you want to protect your investment, consider hiring security for the equipment and products to remain safe.
Salman Zafar is an ecopreneur, consultant, advisor, speaker and journalist with expertise in waste management, waste-to-energy, renewable energy, environment protection, conservation and sustainable development. His geographical areas of focus include Asia, Middle East, Africa and Europe. Salman is the Founder of EcoMENA, a popular voluntary organization based in Qatar. He is also the Founder and CEO of BioEnergy Consult, a reputed consulting firm active in biomass, waste-to-energy and waste management segments.
Salman is a professional environmental writer with more than 350 popular articles to his credit. He is proactively engaged in creating mass environmental awareness in different parts of the world.
Salman Zafar can be reached at salman@ecomena.org or salman@bioenergyconsult.com
2 thoughts on “5 Things to Look for in Industrial Valves”